movement_joints_logo

Click here to enter main site 
Movement Joints (UK) Limited

Tel: 01945 450015

To complete the clause, select the appropriate wording from below. Highlighted text can be ‘dragged and dropped’ to save typing.

M10 CEMENT:SAND/CONCRETE SCREEDS/TOPPINGS

475 STRIP MOVEMENT JOINTS

Movement Joint (UK) Ltd manufacture a full range of strip movement joints suitable for use in screeds, natural stone, cast stone and a variety of other toppings. The range covers normal traffic, heavy traffic and low traffic areas.
See also clause M10/465 for metal section movement joints.

Field limitation joints
Click on the name below to jump to the product and specification details.
Movement Joint 490/AL Field Limitation Joints
All metal construction comprising an aluminium frame with high edge protection, a smooth surface, high load bearing and a good key to mortar through graded aluminium side bars. Designed for heavy-duty application for all finishes.
Movement Joint 494/MS Field Limitation Joints
A combination frame consisting of brass with foam filler with a smooth surface and providing a good key to mortar and designed for all finishes.
Movement Joint 495/P Field Limitation Joint
Aluminium, Brass or Stainless steel construction with a combination of hard and soft PVC insert with metal caps. Designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 496 Field Limitation Joints
Aluminium, Brass or Stainless steel construction with a cellular rubber insert giving high edge protection. Designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 497/AL + ALE Field Limitation Joints
Aluminium or Stainless steel construction with a Nitriflex or PVC insert, separation of mortar beds is achieved by means of an adjustable centre section. Designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 498/AL Field Limitation Joints
Aluminium construction with a cellular rubber insert, designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 630/P & 640/P Field Limitation Joints
Combination co-extruded PVC’s construction for all finishes - screed, natural stone, cast stone etc., for light traffic areas.
Movement Joint 690/P Field Limitation Joints
A PVC construction, designed for heavy-duty application with a high load capability for concrete floors and screed work in heavy traffic areas.
Movement Joint 700/P Field Limitation Joints
Constructed from combination co-extrusion of soft and hard PVC, designed for all finishes and light traffic areas.
Movement Joint 710 Field Limitation Joints
Aluminium, brass or stainless steel construction with a Nitriflex® rubber insert, designed for heavy-duty application with a high load capability and high abrasion resistance for all finishes.

Movement Joint 490/AL Field Limitation Joints
All metal construction comprising an aluminium frame with high edge protection, a smooth surface, high load bearing and a good key to mortar through graded aluminium side bars. Designed for heavy-duty application for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving trucks.
Joint width: 10mm
Visible width: 10mm
Overall profile width: 67mm
Profile height: 35 or 50mm
Colour: Natural
Total Movement: 4mm(+/-2mm)
Also available as floor to wall/corner profile
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference: Movement Joint 490/AL / Movement Joint E 490/AL (floor to wall)
Size:
Visible width:
10mm
Overall profile width:
67mm
Profile height: 35mm / 50mm

Movement Joint 494/MS Field Limitation Joints
A combination frame consisting of brass with foam filler with a smooth surface and providing a good key to mortar and designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 25kN fork-lift truck
Joint width: 8mm
Visible width: 10mm
Overall profile width: 25mm
Profile height: 55mm
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference: Movement Joint 494/MS
Size:
Visible width:
10mm
Overall profile width:
25mm
Profile height: 55mm

Movement Joint 495/P Field Limitation Joint
Aluminium, Brass or Stainless steel construction with a combination of hard and soft PVC insert with metal caps. Designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 5mm
Visible width: 10mm
Overall profile width: 65mm
Profile height: 40 or 50mm
Colour: Black/Grey/RAL colours.
Total Movement: 2mm(+/-1mm)
Available as floor to floor or, floor to wall profiles.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 495/P-AL - Aluminium
Movement Joint 495/P-VA - Stainless steel
Movement Joint 495/P-MS - Brass
Size:
Visible width:
10mm
Overall profile width:
65mm
Profile height: 40mm / 50mm
Colour: Black / Grey / RAL colour: ……

Movement Joint 496 Field Limitation Joints
Aluminium, Brass or Stainless steel construction with a cellular rubber insert giving high edge protection. Designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 5mm
Visible width: 8 and 9mm
Overall profile width: 65 and 85mm
Profile height: 20, 25, 30, 40, 50 and 60mm (Brass not available in 25mm height)
Colour: Black, grey and stone
Total Movement: 4mm(+/-2mm)
Available as floor to floor or, floor to wall profiles.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 496/AL - Aluminium
Movement Joint 496/E - Stainless steel
Movement Joint 496/MS - Brass
Size:
Visible width:
8mm / 9mm
Overall profile width:
65mm / 85mm
Profile height: 20mm / 25mm / 30mm / 40mm / 50mm / 60mm
Colour: Black / Grey / Stone

Movement Joint 497/AL + ALE Field Limitation Joints
Aluminium or Stainless steel construction with a Nitriflex or PVC insert, separation of mortar beds is achieved by means of an adjustable centre section. Designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 12mm
Visible width: 15 and 17mm
Overall profile width: 212mm
Profile height: 50 or 60mm
Colour: Black and grey
Total Movement: 5mm(+/-2.5mm)
Available as floor to floor or, floor to wall profiles.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 497/AL - Aluminium
Movement Joint 497/ALE - Stainless steel
Size:
Visible width:
15mm / 17mm
Overall profile width:
212mm
Profile height: 50mm / 60mm
Colour: Black / Grey

Movement Joint 498/AL Field Limitation Joints
Aluminium construction with a cellular rubber insert, designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 10kN fork-lift trolley, 130kN fork-lift truck and 600kN slow moving truck for 9mm joint and 35kN fork-lift truck and 120kN slow moving small vans for 15mm joint.
Joint width: 9 or 12mm
Visible width: 16 and 24mm
Overall profile width: 150 and 158mm
Profile height: 60mm
Stainless steel finish
Also available as rim profile for floor to wall fixing.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference: Movement Joint 498/AL-009 / Movement Joint 498/AL-015
Size:
Visible width:
9mm / 12mm
Overall profile width:
150mm / 158mm
Profile height: 60mm

Movement Joint 630/P & 640/P Field Limitation Joints
Combination co-extruded PVC’s construction for all finishes - screed, natural stone, cast stone etc., for light traffic areas.
Loadbearing capacity: Pedestrian traffic only
Joint width: 8 or 10mm
Visible width: 8 and 10mm
Profile height: 25, 30, 35, 40, 50 or 60mm
Colour: Grey or RAL colours
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference: Movement Joint 630/P / Movement Joint 640/P
Size:
Overall profile width:
8mm / 10mm
Profile height:
25mm / 30mm / 35mm / 40mm / 50mm
– for 630/P
30mm / 40mm / 50mm / 60mm – for 640/P
Colour: Grey / RAL Colour ……

Movement Joint 690/P Field Limitation Joints
A PVC construction, designed for heavy-duty application with a high load capability for concrete floors and screed work in heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving trucks
Joint width: 1.5mm
Visible width: 1.5mm
Size:
691/P - overall width 30mm, height 40mm
692/P - overall width 35mm, height 50mm
693/P - overall width 60mm, height 80mm
694/P - overall width 70mm, height 125mm
Colour: Grey or beige
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 691/P / Movement Joint 692/P / Movement Joint 693/P / Movement Joint 694/P
Size:
Overall profile width:
30mm / 35mm / 60mm / 70mm
Profile height: 40mm / 50mm / 80mm / 125mm

Colour: Grey / Beige

Movement Joint 700/P Field Limitation Joints
Constructed from combination co-extrusion of soft and hard PVC, designed for all finishes and light traffic areas.
Loadbearing capacity: Pedestrian only
Size:
701/P - Joint width 9mm overall width 9mm, height 25mm, movement 2mm(+/-1)
702/P - Joint width 9mm overall width 9mm, height 40mm, movement 2mm(+/-1)
703/P - Joint width 9mm overall width 9mm, height 55mm, movement 2mm(+/-1)
704/P - Joint width 9mm overall width 9mm, height 70mm, movement 2mm(+/-1)
Visible width: 9mm
Colour: Grey or RAL colours
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 701/P / Movement Joint 702/P / Movement Joint 703/P / Movement Joint 704/P
Size:
Overall profile width:
9mm
Profile height: 25mm / 40mm / 55mm / 70mm

Colour: Grey / RAL Colour ……

Movement Joint 710 Field Limitation Joints
Aluminium, brass or stainless steel construction with a Nitriflex® rubber insert, designed for heavy-duty application with a high load capability and high abrasion resistance for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 10mm
Visible width: 9 and 14mm
Overall width: 14, 40 and 70mm
Profile height: 20, 25, 30, 40, 50 and 60mm
Colour: Black, grey and RAL colours
Total movement: 2mm(+/-1mm)
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 710-AL Aluminium / Movement Joint 710-VA Stainless steel / Movement Joint 710-MS Brass
Movement Joint 710/E-AL Aluminium / Movement Joint 710/E-VA Stainless steel / Movement Joint 710/E-MS Brass
Movement Joint 710/B-AL Aluminium / Movement Joint 710/B-VA Stainless steel / Movement Joint 710/B-MS Brass
Size:
Visible width:
9mm / 14mm
Overall profile width:
14mm / 40mm / 70mm
Profile height: 20mm / 25mm / 30mm / 40mm / 50mm / 60mm
Colour: Black / Grey / RAL Colour ……