Click to enter Movement Joints (UK) web site

Click here to enter main site 
Movement Joints (UK) Limited

Tel: 01945 450015

To complete the clause, select the appropriate wording from below. Highlighted text can be ‘dragged and dropped’ to save typing.

M10 CEMENT BASED LEVELLING/WEARING SCREEDS

476 METAL SECTION MOVEMENT JOINTS . . . . . . .

Movement Joint (UK) Ltd manufacture a full range of movement joints suitable for use in screeds, natural stone, cast stone and a variety of other toppings. The range covers normal traffic, heavy traffic and low traffic areas, and options include ‘T’s,’X’s, upstands and curved sections.
See also clause M10/475 for strip movement joints.

Click on the profile type below to jump to the product and specification details.
Metal floor profiles with rubber inserts - 20mm-100mm joint widths
Floor Profiles – Brass and Stainless steel
All metal floor profile
All metal and heavy duty floor profiles
Floor profiles for joints widths greater than 100mm

Metal floor profiles with rubber inserts - 20mm-100mm joint widths
Click on the name below to jump to the product and specification details.
Movement Joint 414 Floor Series
An aluminium frame with Nitriflex® insert and a smooth surface and high load bearing capacity designed for all finishes.
Movement Joint 426G Floor Series
A range of aluminium frames with Nitriflex® insert with a smooth surface and high load bearing capacity designed for all finishes.
Movement Joint 445 Floor Series
An aluminium frame with interchangeable Nitriflex® insert (a smooth face insert available with reduced movement capability) designed for all finishes.
Movement Joint 446/a+b Floor Series
An aluminium frame with interchangeable Nitriflex® insert (a smooth face insert is also available) designed for all finishes.
Movement Joint 446/c Floor Series
An aluminium frame with interchangeable Nitriflex® insert ( a smooth face insert is also available) designed for all finishes.
Movement Joint 446/cP Floor Series
An aluminium frame with interchangeable Nitriflex® insert with central support and guide section, designed for all finishes.
Movement Joint 447/c Floor Series
An aluminium frame with replaceable Nitriflex® insert with both vertical and horizontal movement capability and designed for all finishes.
Movement Joint 488 Floor Series
An aluminium frame with Nitriflex® insert and smooth surface, designed for all finishes.

Movement Joint 414 Floor Series
An aluminium frame with Nitriflex® insert and a smooth surface and high load bearing capacity designed for all finishes - screed, natural stone, cast stone etc.
Loadbearing capacity: 300kN for slow moving vehicles and 70kN for fork-lift trucks.
Joint Width - up to 35mm
Visible width: 40mm
Overall profile width - 135mm and 155mm
Profile height – 43, 48, 58, 63, 68 and 88mm
Total movement: 4mm(+/-2mm)
Insert colour: Black or grey
Floor to wall/corner profile available
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 414-035 / Movement Joint E 414-035 (floor to wall)
Visible width: 40mm
Overall profile width: 135mm / 155mm
– for 63mm high unit only
Profile height: 43mm / 48mm / 58mm / 63mm / 68mm / 88mm
Colour of insert : Black / Grey

Movement Joint 426G Floor Series
A range of aluminium frames with Nitriflex® insert with a smooth surface and high load bearing capacity designed for all finishes - screed, natural stone, cast stone etc., for normal traffic conditions.
Loadbearing capacity: 70kN fork-lift trucks for 50mm joint, 25kN fork-lift trucks for 80mm joint and slow moving cars only for 100mm joint.
Joint width: Up to 50, 80 and 100mm
Visible width: 70, 90 and 110mm
Overall profile width: 160mm, 180mm and 200mm
Profile height: 43, 48, 58, 63, 68 and 88mm
Insert colour: Black/Grey
Total movement:
6mm(+/-3mm) for 50mm joint
8mm(+/-4mm) for 80mm joint
16mm(+/-8mm) for 100mm joint
Floor to wall/corner profile available
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 426/G-050 / Movement Joint E 426/G-050 (floor to wall)
Movement Joint 426/G-080 / Movement Joint E 426/G-080 (floor to wall)
Movement Joint 426/G-100 / Movement Joint E 426/G-100 (floor to wall)
Visible width:
40mm
- for 50mm wide joint
90mm
- for 80mm wide joint
110mm
- for 100mm wide joint
Overall profile width:
For 50mm wide joint
160mm / 180mm – for 63mm high unit only
For 80mm wide joint
180mm / 200mm – for 63mm high unit only
For 100mm wide joint
200mm / 220mm – for 63mm high unit only
Profile height: 43mm / 48mm / 58mm / 63mm / 68mm / 88mm
Colour of insert: Black / Grey

Movement Joint 445 Floor Series
An aluminium frame with interchangeable Nitriflex® insert (a smooth face insert available with reduced movement capability) designed for all finishes - screed, natural stone, cast stone etc., for normal traffic conditions.
Loadbearing capacity: 25kN fork-lift trucks for 50mm joint
Joint width: Up to 50mm
Visible width: 60mm
Overall profile width: 180mm
Profile height: 20, 25, 35 and 50mm
Insert colour: Black or grey
Total movement: 20mm(+/-10mm)
Floor to wall/corner profiles are also available.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 445-050 / Movement Joint Ev 445-050 (floor to wall)
Visible width: 60mm
Overall profile width: 180mm
Profile height: 20mm / 25mm / 35mm / 50mm
Colour of insert: Black / Grey

Movement Joint 446/a+b Floor Series
An aluminium frame with interchangeable Nitriflex® insert (a smooth face insert is also available) designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 25kN fork-lift trucks and slow moving cars
Joint width: Up to 20, 30, 50 and 65mm
Visible width: 21, 30, 50 and 65mm
Overall profile width: 121, 125, 150 and 165mm
Profile Height:
20 and35mm for 20mm joint
15, 20, 26, 35 and 50mm for 30mm joint
26, 35 and 80mm for 50mm joint
26, 35 and 80mm for 65mm joint
Insert colour: Black/Grey (other colours available on request)
Total movement:
5mm(+/-2.5mm) for 20mm joint
10mm(+/-5mm) for 30mm joint
14mm(+/-7mm) for 50mm joint
20mm(+/-10mm) for 65mm joint
Floor to wall/corner profiles are also available.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 446/a-020 / Movement Joint E 446/a-020 (floor to wall)
Movement Joint 446/b-030 / Movement Joint E 446/b-030 (floor to wall)
Movement Joint 446/b-050 / Movement Joint E 446/b-050 (floor to wall)
Movement Joint 446/b-065 / Movement Joint E 446/b-065 (floor to wall)
Visible width:
21mm
- for 20mm wide joint
30mm
- for 30mm wide joint
50mm
- for 50mm wide joint
65mm
- for 65mm wide joint
Overall profile width:
121mm
– for 20mm wide joint
125mm – for 30mm wide joint
150mm – for 50mm wide joint
165mm – for 65mm wide joint
Profile height:
20mm / 35mm
– for 20mm joint
15mm / 20mm / 26mm / 35mm / 50mm – for 30mm joint
26mm / 35mm / 80mm – for 50mm joint
26mm / 35mm / 80mm – for 65mm joint
Colour of insert: Black / Grey

Movement Joint 446/c Floor Series
An aluminium frame with interchangeable Nitriflex® insert ( a smooth face insert is also available) designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 35kN fork-lift trucks with the 30mm wide joint and 25kN fork-lift trucks for all other widths.
Joint width: Up to 30, 60, 65 and 100mm
Visible width: 45, 65, 80 and 115mm
Overall profile width:
135 and 155mm for 30mm joint
150 and 170mm for 50mm joint
170 and 190mm for 65mm joint
205 and 225mm for 100mm joint
Profile height: 35, 40, 50, 55, 60 and 80mm
Insert colour: Black/Grey (other colours available on request)
Total Movement:
10mm(+/-5mm) for 30mm joint
14mm(+/-7mm) for 50mm joint
20mm(+/-10mm) for 65mm joint
30mm(+/-15mm) for 100mm joint
446/Tc has a 3mm-raised insert for vinyl floor finish and can be welded to vinyl.
446/Tb has a 5mm raised insert for carpet floor covering
Floor to wall/corner profile available
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Standard units
Movement Joint 446/c-030 / Movement Joint E 446/c-030 (floor to wall)
Movement Joint 446/c-050 / Movement Joint E 446/c-050 (floor to wall)
Movement Joint 446/c-065 / Movement Joint E 446/c-065 (floor to wall)
Movement Joint 446/c-100 / Movement Joint E 446/c-100 (floor to wall)
For 3mm raised insert for vinyl floor finish.
Movement Joint 446/Tc-030 / Movement Joint E 446/Tc-030 (floor to wall)
Movement Joint 446/Tc-050 / Movement Joint E 446/Tc-050 (floor to wall)
Movement Joint 446/Tc-065 / Movement Joint E 446/Tc-065 (floor to wall)
Movement Joint 446/Tc-100 / Movement Joint E 446/Tc-100 (floor to wall)
A 5mm raised insert for carpet floor covering
Movement Joint 446/Tb-030 / Movement Joint E 446/Tb-030 (floor to wall)
Movement Joint 446/Tb-050 / Movement Joint E 446/Tb-050 (floor to wall)
Movement Joint 446/Tb-065 / Movement Joint E 446/Tb-065 (floor to wall)
Movement Joint 446/Tb-100 / Movement Joint E 446/Tb-100 (floor to wall)
Visible width:
45mm
- for 30mm wide joint
65mm
- for 50mm wide joint
80mm
- for 65mm wide joint
100mm
- for 100mm wide joint
Overall profile width:
135mm
– for 30mm wide joint
155mm – for 30mm wide joint – 40mm and 55mm high units only
150mm – for 50mm wide joint
170mm – for 50mm wide joint – 40mm and 55mm high units only
170mm – for 65mm wide joint
190mm – for 65mm wide joint – 40mm and 55mm high units only
205mm – for 100mm wide joint
225mm – for 100mm wide joint – 40mm and 55mm high units only
Profile height: 30mm / 40mm / 50mm / 55mm / 60mm / 80
Colour of insert: Black / Grey

Movement Joint 446/cP Floor Series
An aluminium frame with interchangeable Nitriflex® insert with central support and guide section, designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas. It can also be used as a combination joint to accommodate differences in level between two slabs.
Loadbearing capacity: 35kN fork-lift trucks.
Joint width: Up to 50mm
Visible width: 60mm
Overall profile width: 150 and 170mm for 40 and 55mm high units
Profile height: 35, 40, 50, 55, 60 and 80mm
Insert colour: Black or grey (other colours available on request)
Total movement: 20mm(+/-10mm)
Floor to wall/corner profile also available.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 446/cP-050 / Movement Joint E 446/cP-050 (floor to wall)
Visible width: 60mm
Overall profile width:
150mm / 170mm
– for 40mm and 55mm high units only
Profile height: 35mm / 40mm / 50mm / 55mm / 60mm / 80
Colour of insert: Black / Grey

Movement Joint 447/c Floor Series
An aluminium frame with replaceable Nitriflex® insert with both vertical and horizontal movement capability and designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Also available in stainless steel and brass.
Loadbearing capacity: Slow moving cars only.
Joint width: Up to 70mm
Visible width: 88 and 89mm
Overall profile width: 175 and 195mm for 40/41 and 55/56mm high units.
Profile height:
25, 35, 40, 50, 55, 60 and 80mm – for aluminium units
26, 36, 41, 51, 56, 61 and 81mm – for stainless steel and brass units
Insert colour: Black/Grey
Total movement: +/-16mm
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 447/c-070 – for aluminium unit
Movement Joint 447/ce-070 – for stainless steel unit
Movement Joint 447/cm-070 – for brass unit
Visible width:
88mm
- for 447/c
89mm - for 447/ce & 447/cm
Overall profile width:
175mm / 195mm
– for 40/41mm and 55/56mm high units only
Profile height:
25mm / 35mm / 40mm / 50mm / 55mm / 60mm / 80mm
– for aluminium units
26mm / 36mm / 41mm / 51mm / 56mm / 61mm / 81mm – for stainless steel and brass units
Colour of insert: Black / Grey

Movement Joint 488 Floor Series
An aluminium frame with Nitriflex® insert and smooth surface, designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 25kN fork-lift trucks for 80mm joints and slow moving cars only for 100mm joints
Joint width: Up to 80mm and 100mm
Visible width: 100 and 120mm
Overall profile width:
185 and 205mm – for 40 and 55mm high units only
205 and 225mm – for 40 and 55mm high units only
Profile height: 35, 40, 50, 55, 60 and 80mm
Insert colour: Black or grey
Total movement:
18mm(+/-9mm) for 80mm joint
24mm(+/-12mm) for 100mm joint
Floor to wall/corner profile also available.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 488-080 / Movement Joint E 488-080 (floor to wall)
Movement Joint 488-100 / Movement Joint E 488-100 (floor to wall)
Visible width:
100mm
- for 488-080
120mm
- for 488-100
Overall profile width:
185mm / 205mm
– for 40mm and 55mm high units only
205mm / 225mm – for 40mm and 55mm high units only
Profile height: 35mm / 40mm / 50mm / 55mm / 60mm / 80mm
Colour of insert: Black / Grey

Floor Profiles – Brass and Stainless steel
Click on the name below to jump to the product and specification details.
Movement Joint 428 Floor Series
A joint with high resistance to corrosive media incorporating a stainless steel frame with an interchangeable Nitriflex® insert, (a smooth surface option is also available), designed for all finishes.
Movement Joint 445/e +445/m Floor Series
A stainless steel or brass capped finish on an aluminium frame with Nitriflex® insert, (a smooth surface option is also available), designed for all finishes.
Movement Joint 446/cPe + cPm Floor Series
A stainless steel or brass capped finish to an aluminium frame with interchangeable Nitriflex® insert, (a smooth surface option is also available), designed for all finishes.
Movement Joint 446/Tbm Floor Series
A 3mm brass plate finish to an aluminium frame with interchangeable Nitriflex® insert, designed for all finishes.
Movement Joint 446/Tcm Floor Series
A 3mm brass capped finish to an aluminium frame with interchangeable Nitriflex® insert, (a smooth surface insert is also available), designed for all finishes.

Movement Joint 428 Floor Series
A joint with high resistance to corrosive media incorporating a stainless steel frame with an interchangeable Nitriflex® insert, (a smooth surface option is also available), designed for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 35kN fork-lift trucks and 90kN slow moving small vans.
Joint width: Up to 30 and 50mm
Visible width: 30 and 50mm
Overall profile width: 130 and 150mm
Profile height: 20, 35, 45, 50, 55 and 60mm
Insert Colour: Black/Grey
Total movement: 10mm(+/-5mm)
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference: Movement Joint 428/d-030 / Movement Joint 428/d-050
Visible width:
30mm
- for 30mm wide joint
50mm
- for 50mm wide joint
Overall profile width: 130mm / 150mm
Profile height: 20mm / 35mm / 45mm / 50mm / 55mm / 60mm
Colour of insert: Black / Grey

Movement Joint 445/e +445/m Floor Series
A stainless steel or brass capped finish on an aluminium frame with Nitriflex® insert, (a smooth surface option is also available), designed for all finishes – screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 25kN fork-lift trucks.
Joint width: Up to 50mm
Visible width: 62mm
Overall profile width: 180mm
Profile height: 21, 26, 36 and 51mm
Insert colour: Black or grey (alternative colours available)
Total movement: 20mm(+/-10mm)
Floor to wall/corner profile are also available.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 445/e-050 / Movement Joint E 445/e-050 (floor to wall) – for stainless steel unit
Movement Joint 445/m-050 / Movement Joint E 445/m-050 (floor to wall) – for brass unit
Visible width: 62mm
Overall profile width: 180mm
Profile height: 21mm / 26mm / 36mm / 51mm
Colour of insert: Black / Grey

Movement Joint 446/cPe + cPm Floor Series
A stainless steel or brass capped finish to an aluminium frame with interchangeable Nitriflex® insert, (a smooth surface option is also available), designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 35kN fork-lift trucks.
Joint width: Up to 50mm
Visible width: 62mm
Overall profile width: 150mm and 170mm – for 41 and 56mm high units
Profile height: 36, 41, 51, 56, 61 and 81mm
Insert colour: Black or grey (alternative colours available)
Total movement: 20mm(+/-10mm)
Floor to wall/corner profile available.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 446/cPe-050 / Movement Joint E 446/cPe-050 (floor to wall) – for stainless steel unit
Movement Joint 446/cPm-050 / Movement Joint E 446/cPm-050 (floor to wall) – for brass unit
Visible width: 62mm
Overall profile width: 150mm / 170mm – for 41mm and 56mm high units only
Profile height: 36mm / 41mm / 51mm / 56mm / 61mm / 81mm
Colour of insert: Black / Grey

Movement Joint 446/Tbm Floor Series
A 3mm brass plate finish to an aluminium frame with interchangeable Nitriflex® insert, designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 25kN fork-lift trucks to 20 and 30mm joints, slow moving cars to 50 and 65mm joints.
Joint width: Up to 20, 30, 50 or 65mm
Visible width: 27, 36, 56 and 71mm
Overall profile width: 127, 132, 156 and 171mm
Profile height:
23 and 38mm – for 20mm joint
18, 23, 29, 38 and 53mm – for 30mm joint
29, 38 and 83mm – for 50 and 65mm joints
Insert colour: Black or grey (alternative colours available)
Total movement:
5mm(+/-2.5mm) – for 20mm joint
10mm(+/-5mm) – for 30mm joint
14mm(+/-7mm) – for 50mm joint
20mm(+/-10mm) – for 65mm joint
Floor to wall/corner profile available.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 446/Tam-020 / Movement Joint E 446/Tam-020 (floor to wall)
Movement Joint 446/Tbm-030 / Movement Joint E 446/Tbm-030 (floor to wall)
Movement Joint 446/Tbm-050 / Movement Joint E 446/Tbm-050 (floor to wall)
Movement Joint 446/Tbm-065 / Movement Joint E 446/Tbm-065 (floor to wall)
Visible width:
27mm
- for 20mm joint
36mm
- for 30mm joint
56mm
- for 50mm joint
71mm
- for 65mm joint
Overall profile width: 127mm / 132mm / 156mm / 171mm
Profile height:
23mm / 38mm
– for 20mm joint
18mm / 23mm / 29mm / 38 / 53mm – for 30mm joint
29mm / 38 / 83mm – for 50 and 65mm joints
Colour of insert: Black / Grey

Movement Joint 446/Tcm Floor Series
A 3mm brass capped finish to an aluminium frame with interchangeable Nitriflex® insert, (a smooth surface insert is also available), designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 35kN fork-lift trucks to 30mm joints, 25kN fork-lift trucks to 50 and 65mm joints.
Joint width: Up to 30, 50 or 65mm
Visible width: 45, 65 and 80mm
Overall profile width:
141 or 161mm to 43 and 58mm high units
156 or 176mm to 43 and 58mm high units
176 or 199mm to 43 and 58mm high units
Profile height: 38, 43, 53, 58, 63 and 83mm
Insert colour: Black or grey (alternative colours available)
Total movement:
10mm(+/-5mm) – for 30mm joint
14mm(+/-7mm) – for 50mm joint
20mm(+/-10mm) – for 65mm joint
Floor to wall/corner profile available.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 446/Tcm-030 / Movement Joint E 446/Tcm-030 (floor to wall)
Movement Joint 446/Tcm-050 / Movement Joint E 446/Tcm-050 (floor to wall)
Movement Joint 446/Tcm-065 / Movement Joint E 446/Tcm-065 (floor to wall)
Visible width:
45mm
- for 30mm joint
65mm
- for 50mm joint
80mm
- for 65mm joint
Overall profile width:
141mm / 161mm
– for 30mm joints
156mm / 176mm – for 50mm joints
176mm / 199mm – for 65mm joints
Profile height: 38mm / 43mm / 53mm / 58mm / 63mm / 83mm
Colour of insert: Black / Grey

All Metal Floor Profile

Movement Joint SA Floor Series
An all metal construction with a smooth surface, easy installation with a high load capacity, designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas. An optional water barrier can also be provided.
Movement Joint SAA-1
Aluminium, 25mm joint width o/a profile width 90mm. Visible width: 90mm
Movement +/-15mm
Movement Joint SAS-1
Stainless steel 25mm joint width o/a profile width 90mm. Visible width: 90mm
Movement +/-15mm
Movement Joint SAA-2
Aluminium 50mm joint width o/a profile width 114mm. Visible width: 114mm
Movement +/-25mm
Movement Joint SAS-2
Stainless steel 50mm joint width o/a profile width 114mm. Visible width: 114mm
Movement +/-25mm
Movement Joint SAA-3
Aluminium 75mm joint width o/a profile width 197mm. Visible width: 197mm
Movement +/-40mm
Movement Joint SAS-3
Stainless steel 75mm joint width o/a profile width 197mm. Visible width: 197mm
Movement +/-40mm
Standard heights: 50, 63, 76 and 89mm. Other heights are available on request.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint SAA-1 – Aluminium
Movement Joint SAS-1 – Stainless steel
Movement Joint SAA-2 – Aluminium
Movement Joint SAS-2 – Stainless steel
Movement Joint SAA-3 – Aluminium
Movement Joint SAS-3 – Stainless steel
Visible width:
90mm
- for SAA-1 & SAS-1
114mm
- for SAA-2 & SAS-2
197mm
- for SAA-3 & SAS-3
Overall profile width:
90mm
– for SAA-1 & SAS-1.
114mm – for SAA-2 & SAS-2.
197mm – for SAA-3 & SAS-3.
Profile height: 50mm / 63mm / 76mm / 89mm
Colour of insert: Not applicable

All metal and heavy duty floor profiles
Click on the name below to jump to product and specification details.
Movement Joint 425/AL Floor Series
An all metal construction comprising an aluminium frame with a cellular rubber spacer. Designed to provide high movement absorption for all finishes.
Movement Joint 426/ALR+ALG Floor Series
An all metal construction comprising an aluminium frame in a natural finish. Designed to provide absorption of settlement movement for all finishes.
Movement Joint 426/ALRV + 426/ALGV Floor Series
An all metal construction comprising an aluminium frame in a natural finish with high load bearing capabilities designed for all finishes.
Movement Joint 426/NALG + NALR Floor Series
An all metal construction comprising an aluminium frame in a natural smooth or grooved surface finish designed for all finishes.
Movement Joint 427/ALG + 427/ALR Floor Series
An all metal construction comprising an aluminium frame in a natural, smooth or grooved surface finish designed for all finishes.
Movement Joint 427/ALGV + 427/ALRV Floor Series
An all metal construction comprising an aluminium frame in a natural, smooth or grooved surface finish designed for all finishes.
Movement Joint STF60 Floor Series
An all metal construction comprising a steel frame with a smooth surface. Designed for heavy-duty application with a high load capability designed for all finishes.

Movement Joint 425/AL Floor Series
An all metal construction comprising an aluminium frame with a cellular rubber spacer. Designed to provide high movement absorption for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 35kN fork-lift trucks and 120kN slow moving small vans.
Joint width: Up to 35mm
Visible width: 43mm
Overall profile width: 175mm
Profile height: 60mm
Colour: Natural
Total movement: 16mm(+/-8mm)
Also available as a floor to wall/corner profile.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 425/AL / Movement Joint E 425/AL (floor to wall)
Visible width: 43mm
Overall profile width: 175mm
Profile height: 60mm
Colour of insert: Not applicable

Movement Joint 426/ALR+ALG Floor Series
An all metal construction comprising an aluminium frame in a natural finish. Designed to provide absorption of settlement movement for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
The ALR strip has a grooved anti-slip surface, the ALG strip has a smooth surface.
Loadbearing capacity: 70kN fork-lift trucks and 90kN slow moving small vans to 50mm joints and 25kN fork-lift trucks to 80 and 100mm joints.
Joint Width: Up to 50, 80 and 100mm
Visible width: 70, 95 and 135mm
Overall profile width: 155, 175, 180, 200, 225 and 245mm
Profile Height: 43, 48, 58, 63, 68 and 88mm
Colour: Natural
Total Movement:
10mm(+/-5mm) for 50mm joint
20mm(+/-10mm) for 80mm joint
30mm(+/-15mm) for 100mm joint
Higher movement capabilities are available e.g. 426/ALR-SP +/- 50mm
Also available as a floor to wall/corner profile.
Vapour barrier with a drainage appliance
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk mail: info@mjuk.co.uk
Product reference:
Movement Joint 426/ALG-050 / Movement Joint E 426/ALG-050 (floor to wall)
Movement Joint 426/ALG-050-SP (higher movement joint)
Movement Joint 426/ALR-050 / Movement Joint E 426/ALR-050 (floor to wall)
Movement Joint 426/ALR-050-SP (higher movement joint)
Movement Joint 426/ALR-080 / Movement Joint E 426/ALR-080 (floor to wall)
Movement Joint 426/ALR-080-SP (higher movement joint)
Movement Joint 426/ALR-100 / Movement Joint E 426/ALR-100 (floor to wall)
Movement Joint 426/ALR-100-SP (higher movement joint)
Visible width:
70mm
- for 50mm joint
95mm
- for 80mm joint
100mm
- for 100mm joint
Overall profile width:
155mm / 175mm
– to 50mm joints
180mm / 200mm – to 80mm joints
225mm / 245mm – to 100mm joints
Profile height: 43mm / 48mm / 58mm / 63mm / 68mm / 88mm
Options: Vapour barrier with a drainage appliance
Colour of insert: Not applicable

Movement Joint 426/ALRV + 426/ALGV Floor Series
An all metal construction comprising an aluminium frame in a natural finish with high load bearing capabilities designed for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
The ALRV strip has a grooved anti-slip surface, the ALGV strip has a smooth surface.
Loadbearing capacity: 10 kN fork-lift trolleys and 70kN fork-lift trucks to 35mm joints, 70kN fork-lift trucks to 50mm joints, 35kN fork-lift trucks to 80mm joints and 25kN fork-lift trucks to 100mm joints
Joint width: Up to 35, 50, 80 and 100mm
Visible width: 70, 95 and 135mm
Overall profile width: 155, 175, 180, 200, 225 and 245mm
Profile height: 43, 48, 58, 63, 68 and 88mm
Colour: Natural
Total Movement:
10mm(+/-5mm) for 50mm joint
20mm(+/-10mm) for 80mm joint
30mm(+/-15mm) for 100mm joint
Also available as a floor to wall/corner profile.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 426/ALGV-035 / Movement Joint E 426/ALGV-035 (floor to wall)
Movement Joint 426/ALRV-035 / Movement Joint E 426/ALRV-035 (floor to wall)
Movement Joint 426/ALGV-050 / Movement Joint E 426/ALGV-050 (floor to wall)
Movement Joint 426/ALRV-050 / Movement Joint E 426/ALRV-050 (floor to wall)
Movement Joint 426/ALRV-080 / Movement Joint E 426/ALRV-080 (floor to wall)
Movement Joint 426/ALRV-100 / Movement Joint E 426/ALRV-100 (floor to wall)
Visible profile width:
70mm
- to 35mm joints
70mm
- to 50mm joints
90mm
- to 80mm joints
135mm
- to 100mm joints
Overall profile width:
155mm
– to 35mm joints
155mm / 175mm – to 50mm joints
180mm / 200mm – to 80mm joints
225mm / 245mm – to 100mm joints
Profile height:
43mm / 58mm
– to 35mm joints
43mm / 48mm / 58mm / 63mm / 68mm / 88mm – to 50, 80 and 100mm joints
Colour of insert: Not applicable

Movement Joint 426/NALG + NALR Floor Series
An all metal construction comprising an aluminium frame in a natural smooth or grooved surface finish designed for all finishes - screed, natural stone, cast stone etc., for low traffic areas.
The NALR strip has a grooved anti-slip surface, the NALG strip has a smooth surface.
Loadbearing capacity: 25kN fork-lift trucks to 70mm joints, slow moving cars only to 100mm joints
Joint width: Up to 70 and 100mm
Visible width: 175 and 200mm
Overall profile width: 175 and 200mm
Profile height: 43mm
Colour: Natural
Total Movement:
10mm(+/-5mm) for 70mm joint
20mm(+/-10mm) for 100mm joint
Also available as a floor to wall/corner profile.
Optional water barrier
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 426/NALG-070 / Movement Joint E 426/NALG-070 (floor to wall)
Movement Joint 426/NALR-070 / Movement Joint E 426/NALR-070 (floor to wall)
Movement Joint 426/NALR-100 / Movement Joint E 426/NALR-100 (floor to wall)
Visible profile width:
175mm
- to 70mm joints
200mm
- to 100mm joints
Overall profile width: 175mm / 200mm
Profile height: 43mm
Options: Vapour barrier with a drainage appliance
Colour of insert: Not applicable

Movement Joint 427/ALG + 427/ALR Floor Series
An all metal construction comprising an aluminium frame in a natural, smooth or grooved surface finish designed for all finishes - screed, natural stone, cast stone etc., for medium traffic areas.
The ALR strip has a grooved anti-slip surface, the ALG strip has a smooth surface.
Loadbearing capacity: 70kN fork-lift trucks and 600kN slow moving trucks to 40mm joints, 35kN fork-lift trucks to 65mm joints and 25kN trucks to 100mm joints.
Joint width: Up to 40, 65 and 100mm
Visible width: 97, 128 and 165mm
Overall profile width: 197, 228 and 265mm
Profile height: 18.5, 32 and 45.5mm
Colour: Natural
Total Movement:
10mm(+/-5mm) to 40mm joints
20mm(+/-10mm) to 65mm joints
30mm(+/-15mm) to 100mm joints
Optional water barrier.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 427/ALG-040
Movement Joint 427/ALR-040
Movement Joint 427/ALR-065
Movement Joint 427/ALR-100
Visible profile width:
97mm
- to 40mm joints
128mm
- to 65mm joints
165mm
- to 100mm joints
Overall profile width: 195mm / 228mm / 265mm
Profile height: 18.5mm / 32mm / 45.5mm
Options: Vapour barrier with a drainage appliance
Colour of insert: Not applicable

Movement Joint 427/ALGV + 427/ALRV Floor Series
An all metal construction comprising an aluminium frame in a natural, smooth or grooved surface finish designed for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
The ALRV strip has a grooved anti-slip surface, the ALGV strip has a smooth surface.
Loadbearing capacity: 10kN fork-lift trolleys and 600kN slow moving trucks to 40mm joints, 300kN slow moving trucks to 65mm joints and 25kN trucks to 100mm joints.
Joint width: Up to 40, 65 and 100mm
Visible width: 97, 128 and 165mm
Overall profile width: 197, 228 and 265mm
Profile height: 32 and 45.5mm
Colour: Natural
Total Movement:
10mm(+/-5mm) to 40mm joints
20mm(+/-10mm) to 65mm joints
30mm(+/-15mm) to 100mm joints
Also available as a floor to wall/corner profile.
Optional water barrier.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 427/ALGV-040 / Movement Joint E 427/ALGV-040 (floor to wall)
Movement Joint 427/ALRV-040 / Movement Joint E 427/ALRV-040 (floor to wall)
Movement Joint 427/ALRV-065 / Movement Joint E 427/ALRV-065 (floor to wall)
Movement Joint 427/ALRV-100 / Movement Joint E 427/ALRV-100 (floor to wall)
Visible profile width:
97mm
- to 40mm joints
128mm
- to 65mm joints
165mm
- to 100mm joints
Overall profile width: 197mm / 228mm / 265mm
Profile height: 32mm / 45.5mm
Options: Vapour barrier with a drainage appliance
Colour of insert: Not applicable

Movement Joint STF60 Floor Series
An all metal construction comprising a steel frame with a smooth surface. Designed for heavy-duty application with a high load capability designed for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 10kN fork-lift trolleys, 130kN fork-lift trucks and 600kN slow moving trucks
Joint Width: 20 to 100mm
Visible width: 300mm
Overall profile width: 300mm
Profile Height: 100mm
Total Movement: From 10mm(+/-5mm) to 20mm(+/-10mm)
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference: Movement Joint STF60
Overall profile width:
Available from 20 to 100mm. Consult with Movement Joints (UK) for recommendations and details
Profile height: 100mm
Colour of insert: Not applicable

Floor profiles for joints widths greater than 100mm
Click on the name below to jump to the product and specification details.
Movement Joint 800 Floor Series
An aluminium frame with a Nitriflex® insert designed to absorb vertical movement for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.
Movement Joint 810 Floor Series
Constructed of interchangeable aluminium components with a Nitriflex® insert, designed to absorb vertical movement designed for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.
Movement Joint 820 Floor Series
Constructed of aluminium components with a Nitriflex® insert designed for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.
Movement Joint 830 Floor Series
Constructed of aluminium components with a Nitriflex® insert, designed to absorb vertical movement for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.
Movement Joint 840 Floor Series
Constructed of interchangeable aluminium components with a Nitriflex® insert, designed to absorb vertical movement for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.

Movement Joint 800 Floor Series
An aluminium frame with a Nitriflex® insert designed to absorb vertical movement for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.
Loadbearing capacity: Slow moving cars only.
Sizes:
800-120 - Joint width 120mm o/a width 220mm, visible width: 130mm
movement 18(+/-9)
800-140 - Joint width 140mm o/a width 240mm, visible width: 150mm
movement 20(+/-10)
800-160 - Joint width 160mm o/a width 260mm, visible width: 170mm
movement 24(+-12)
800-180 - Joint width 180mm o/a width 280mm, visible width: 190mm
movement 28(+/-14)
800-200 - Joint width 200mm o/a width 300mm, visible width: 210mm
movement 30(+/-15)
800-280 - Joint width 280mm o/a width 400mm, visible width: 290mm
movement 70(+30/-40)
800-350 - Joint width 350mm o/a width 470mm, visible width: 360mm
movement 90(-40/+50)
Profile height: 43, 48, 58, 63, 68 and 88mm
Total Movement:
18mm(+/-9mm) to 120mm joints
20mm(+/-10mm) to 140mm joints
24mm(+/-12mm) to 160mm joints
28mm(+/-14mm) to 180mm joints
30mm(+/-15mm) to 200mm joints
70mm(+40/-30mm) to 280mm joints
90mm(+50/-40mm) to 350mm joints
Colour: Black/Grey
Also available as a wall/corner profile
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 800-120 / Movement Joint E 800-120 (floor to wall)
Movement Joint 800-140 / Movement Joint E 800-140 (floor to wall)
Movement Joint 800-160 / Movement Joint E 800-160 (floor to wall)
Movement Joint 800-180 / Movement Joint E 800-180 (floor to wall)
Movement Joint 800-200 / Movement Joint E 800-200 (floor to wall)
Movement Joint 800-280 / Movement Joint E 800-280 (floor to wall)
Movement Joint 800-350 / Movement Joint E 800-350 (floor to wall)
Visible profile width:
130mm
- for 800-120
150mm
- for 800-140
170mm
- for 800-160
190mm
- for 800-180
210mm
- for 800-200
290mm
- for 800-280
360mm
- for 800-350
Overall profile width: 220mm / 240mm / 260mm / 280mm / 300mm / 400mm / 470mm
Profile height: 43mm / 48mm / 58mm / 63mm / 68mm / 88mm
Colour of insert: Black / Grey

Movement Joint 810 Floor Series
Constructed of interchangeable aluminium components with a Nitriflex® insert, designed to absorb vertical movement designed for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.
Loadbearing capacity: Slow moving cars only.
Sizes:
810-135 - Joint width 135mm o/a width 255mm, visible width: 165mm
movement 40(+/-20)
810-210 - Joint width 210mm o/a width 340mm, visible width: 250mm
movement 100(+/-50)
810-250 - Joint width 250mm o/a width 370mm, visible width: 280mm
movement 120(+/-60)
810-340 - Joint width 340mm o/a width 465mm, visible width: 375mm
movement 150(+/-75)
Profile height: 43, 48, 58, 63, 68 and 88mm
Total Movement:
40mm(+/-20mm) to 135mm joints
100mm(+/-50mm) to 210mm joints
120mm(+/-60mm) to 250mm joints
150mm(+/-75mm) to 340mm joints
Colour: Natural
Also available as a wall/corner profile
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 810-135 / Movement Joint E 810-135 (floor to wall)
Movement Joint 810-210 / Movement Joint E 810-210 (floor to wall)
Movement Joint 810-250 / Movement Joint E 810-250 (floor to wall)
Movement Joint 810-340 / Movement Joint E 810-340 (floor to wall)
Visible profile width:
165mm
- for 810-135
250mm
- for 810-210
280mm
- for 810-250
375mm
- for 810-340
Overall profile width: 255mm / 340mm / 370mm / 465mm
Profile height: 43mm / 48mm / 58mm / 63mm / 68mm / 88mm
Colour of insert: Black / Grey

Movement Joint 820 Floor Series
Constructed of aluminium components with a Nitriflex® insert designed for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.
Loadbearing capacity: Slow moving cars only.
Sizes:
820-135 - Joint width 135mm o/a width 295mm, visible width: 195mm
movement 40(+/-20)
820-210 - Joint width 210mm o/a width 380mm, visible width: 280mm
movement 100(+/-50)
820-250 - Joint width 250mm o/a width 410mm, visible width: 310mm
movement 120(+/-60)
820-340 - Joint width 340mm o/a width 505mm, visible width: 405mm
movement 150(+/-75)
Profile height: 32 and 45.5mm
Total Movement:
40mm(+/-20mm) to 135mm joints
100mm(+/-50mm) to 210mm joints
120mm(+/-60mm) to 250mm joints
150mm(+/-75mm) to 340mm joints
Colour: Natural
Also available as a wall/corner profile
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 820-135 / Movement Joint E 820-135 (floor to wall)
Movement Joint 820-210 / Movement Joint E 820-210 (floor to wall)
Movement Joint 820-250 / Movement Joint E 820-250 (floor to wall)
Movement Joint 820-340 / Movement Joint E 820-340 (floor to wall)
Visible profile width:
195mm
- for 820-135
280mm
- for 820-210
310mm
- for 820-250
405mm
- for 820-340
Overall profile width: 295mm / 380mm / 410mm / 505mm
Profile height: 32mm / 45.5mm
Colour of insert: Black / Grey

Movement Joint 830 Floor Series
Constructed of aluminium components with a Nitriflex® insert, designed to absorb vertical movement for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.
Loadbearing capacity: Slow moving cars only.
Sizes:
830-120 - Joint width 120mm o/a width 225/245mm, visible width: 140mm
movement 30(+/-15)
830-160 - Joint width 160mm o/a width 260/280mm, visible width: 170mm
movement 40(+25/-15)
830-210 - Joint width 210mm o/a width 330/350mm, visible width: 240mm
movement 45(+30/-15)
830-260 - Joint width 260mm o/a width 375/395mm, visible width: 280mm
movement 50(+35/-15)
830-310 - Joint width 310mm o/a width 430/455mm, visible width: 320mm
movement 60(+40/-20)
Profile height: 35, 40, 50, 55, 60 and 80mm
Total Movement:
30mm(+/-15mm) to 120mm joints
40mm(+25/-15mm) to 160mm joints
45mm(+30/-15mm) to 210mm joints
50mm(+35/-15mm) to 260mm joints
60mm(+40/-20mm) to 310mm joints
Colour: Black/Grey
Also available as a corner profile
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 830-120 / Movement Joint E 830-120 (corner)
Movement Joint 830-160 / Movement Joint E 830-160 (corner)
Movement Joint 830-210 / Movement Joint E 830-210 (corner)
Movement Joint 830-260 / Movement Joint E 830-260 (corner)
Movement Joint 830-310 / Movement Joint E 830-310 (corner)
Visible profile width:
140mm
- for 830-120
170mm
- for 830-160
240mm
- for 830-210
280mm
- for 830-260
320mm
- for 830-310
Overall profile width:
225mm / 245mm
- to 120mm joints
260mm / 280mm - to 160mm joints
330mm / 350mm - to 210mm joints
375mm / 395mm - to 260mm joints
430mm / 455mm - to 310mm joints
Profile height: 35mm / 40mm / 50mm / 55mm / 60mm / 80mm
Colour of insert: Black / Grey

Movement Joint 840 Floor Series
Constructed of interchangeable aluminium components with a Nitriflex® insert, designed to absorb vertical movement for all finishes - screed, natural stone, cast stone etc., for low to normal traffic areas and for use with wide joints in mining or subsidence areas.
Loadbearing capacity: Pedestrian traffic only.
Sizes:
840-120 - Joint width 120mm o/a width 300mm, visible width: 300mm
movement 60(+/-30)
840-160 - Joint width 160mm o/a width 340mm, visible width: 340mm
movement 80(+/-40)
840-200 - Joint width 200mm o/a width 380mm, visible width: 380mm
movement 100(+/-50)
840-240 - Joint width 240mm o/a width 440mm, visible width: 440mm
movement 130(+-65)
840-320 - Joint width 320mm o/a width 500mm, visible width: 500mm
movement 160(+/-80)
840-400 - Joint width 400mm o/a width 580mm, visible width: 580mm
movement 200(+/-100)
Profile height: 30mm
Total Movement:
60mm(+/-30mm) to 120mm joints
80mm(+/-40mm) to 160mm joints
100mm(+/-50mm) to 200mm joints
130mm(+/-65mm) to 260mm joints
160mm(+/-80mm) to 320mm joints
200mm(+/-100mm) to 400mm joints
Colour: Black/Grey
Also available as a corner profile
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 840-120 / Movement Joint E 840-120 (corner)
Movement Joint 840-160 / Movement Joint E 840-160 (corner)
Movement Joint 840-200 / Movement Joint E 840-200 (corner)
Movement Joint 840-240 / Movement Joint E 840-240 (corner)
Movement Joint 840-320 / Movement Joint E 840-320 (corner)
Movement Joint 840-400 / Movement Joint E 840-400 (corner)
Visible profile width:
300mm
- for 840-120
340mm
- for 840-160
380mm
- for 840-200
440mm
- for 840-240
500mm
- for 840-320
580mm
- for 840-400
Overall profile width: 300mm / 340mm / 380mm / 440mm / 500mm / 580mm

Profile height: 30mm
Colour of insert: Black / Grey