Movement_Joints/M13/375/SV/IV

Click here to enter main site

Movement Joints (UK) Limited

Tel: 01945 450015

To complete the clause, select the appropriate wording from below. Highlighted text can be ‘dragged and dropped’ to save typing.

M13 CALCIUM SULFATE BASED LEVELLING SCREEDS

375 STRIP MOVEMENT JOINTS . . . . . . .

Movement Joint (UK) Ltd manufacture a full range of strip movement joints suitable for use in screeds, natural stone, cast stone and a variety of other toppings. The range covers normal traffic, heavy traffic and low traffic areas.
See also clause M13/395 for metal section movement joints.

Field limitation joints
Click on the name below to jump to the product and specification details.
Movement Joint 490/AL Field Limitation Joints
All metal construction comprising an aluminium frame with high edge protection, a smooth surface, high load bearing and a good key to mortar through graded aluminium side bars. Designed for heavy-duty application for all finishes.
Movement Joint 494/MS Field Limitation Joints
A combination frame consisting of brass with foam filler with a smooth surface and providing a good key to mortar and designed for all finishes.
Movement Joint 495/P Field Limitation Joint
Aluminium, Brass or Stainless steel construction with a combination of hard and soft PVC insert with metal caps. Designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 496 Field Limitation Joints
Aluminium, Brass or Stainless steel construction with a cellular rubber insert giving high edge protection. Designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 497/AL + ALE Field Limitation Joints
Aluminium or Stainless steel construction with a Nitriflex or PVC insert, separation of mortar beds is achieved by means of an adjustable centre section. Designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 498/AL Field Limitation Joints
Aluminium construction with a cellular rubber insert, designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 630/P & 640/P Field Limitation Joints
Combination co-extruded PVC’s construction for all finishes - screed, natural stone, cast stone etc., for light traffic areas.
Movement Joint 690/P Field Limitation Joints
A PVC construction, designed for heavy-duty application with a high load capability for concrete floors and screed work in heavy traffic areas.
Movement Joint 700/P Field Limitation Joints
Constructed from combination co-extrusion of soft and hard PVC, designed for all finishes and light traffic areas.
Movement Joint 710 Field Limitation Joints
Aluminium, brass or stainless steel construction with a Nitriflex® rubber insert, designed for heavy-duty application with a high load capability and high abrasion resistance for all finishes.

Movement Joint 490/AL Field Limitation Joints
All metal construction comprising an aluminium frame with high edge protection, a smooth surface, high load bearing and a good key to mortar through graded aluminium side bars. Designed for heavy-duty application for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving trucks.
Joint width: 10mm
Visible width: 10mm
Overall profile width: 67mm
Profile height: 35 or 50mm
Colour: Natural
Total Movement: 4mm(+/-2mm)
Also available as floor to wall/corner profile
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference: Movement Joint 490/AL / Movement Joint E 490/AL (floor to wall)
Size:
Visible width: 10mm
Overall profile width: 67mm
Profile height: 35mm / 50mm

Movement Joint 494/MS Field Limitation Joints
A combination frame consisting of brass with foam filler with a smooth surface and providing a good key to mortar and designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 25kN fork-lift truck
Joint width: 8mm
Visible width: 10mm
Overall profile width: 25mm
Profile height: 55mm
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Movement Joint 495/P Field Limitation Joint
Aluminium, Brass or Stainless steel construction with a combination of hard and soft PVC insert with metal caps. Designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 5mm
Visible width: 10mm
Overall profile width: 65mm
Profile height: 40 or 50mm
Colour: Black/Grey/RAL colours.
Total Movement: 2mm(+/-1mm)
Available as floor to floor or, floor to wall profiles.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Movement Joint 496 Field Limitation Joints
Aluminium, Brass or Stainless steel construction with a cellular rubber insert giving high edge protection. Designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 5mm
Visible width: 8 and 9mm
Overall profile width: 65 and 85mm
Profile height: 20, 25, 30, 40, 50 and 60mm (Brass not available in 25mm height)
Colour: Black, grey and stone
Total Movement: 4mm(+/-2mm)
Available as floor to floor or, floor to wall profiles.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Movement Joint 497/AL + ALE Field Limitation Joints
Aluminium or Stainless steel construction with a Nitriflex or PVC insert, separation of mortar beds is achieved by means of an adjustable centre section. Designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 12mm
Visible width: 15 and 17mm
Overall profile width: 212mm
Profile height: 50 or 60mm
Colour: Black and grey
Total Movement: 5mm(+/-2.5mm)
Available as floor to floor or, floor to wall profiles.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 497/AL - Aluminium
Movement Joint 497/ALE - Stainless steel
Size:
Visible width: 15mm / 17mm
Overall profile width: 212mm
Profile height: 50mm / 60mm
Colour: Black / Grey

Movement Joint 498/AL Field Limitation Joints
Aluminium construction with a cellular rubber insert, designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 10kN fork-lift trolley, 130kN fork-lift truck and 600kN slow moving truck for 9mm joint and 35kN fork-lift truck and 120kN slow moving small vans for 15mm joint.
Joint width: 9 or 12mm
Visible width: 16 and 24mm
Overall profile width: 150 and 158mm
Profile height: 60mm
Stainless steel finish
Also available as rim profile for floor to wall fixing.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference: Movement Joint 498/AL-009 / Movement Joint 498/AL-015
Size:
Visible width: 9mm / 12mm
Overall profile width: 150mm / 158mm
Profile height: 60mm

Movement Joint 630/P & 640/P Field Limitation Joints
Combination co-extruded PVC’s construction for all finishes - screed, natural stone, cast stone etc., for light traffic areas.
Loadbearing capacity: Pedestrian traffic only
Joint width: 8 or 10mm
Visible width: 8 and 10mm
Profile height: 25, 30, 35, 40, 50 or 60mm
Colour: Grey or RAL colours
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference: Movement Joint 630/P / Movement Joint 640/P
Size:
Overall profile width: 8mm / 10mm
Profile height:
25mm / 30mm / 35mm / 40mm / 50mm – for 630/P
30mm / 40mm / 50mm / 60mm – for 640/P
Colour: Grey / RAL Colour ……

Movement Joint 690/P Field Limitation Joints
A PVC construction, designed for heavy-duty application with a high load capability for concrete floors and screed work in heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving trucks
Joint width: 1.5mm
Visible width: 1.5mm
Size:
691/P - overall width 30mm, height 40mm
692/P - overall width 35mm, height 50mm
693/P - overall width 60mm, height 80mm
694/P - overall width 70mm, height 125mm
Colour: Grey or beige
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 691/P / Movement Joint 692/P / Movement Joint 693/P / Movement Joint 694/P
Size:
Overall profile width: 30mm / 35mm / 60mm / 70mm
Profile height: 40mm / 50mm / 80mm / 125mm
Colour: Grey / Beige

Movement Joint 700/P Field Limitation Joints
Constructed from combination co-extrusion of soft and hard PVC, designed for all finishes and light traffic areas.
Loadbearing capacity: Pedestrian only
Size:
701/P - Joint width 9mm overall width 9mm, height 25mm, movement 2mm(+/-1)
702/P - Joint width 9mm overall width 9mm, height 40mm, movement 2mm(+/-1)
703/P - Joint width 9mm overall width 9mm, height 55mm, movement 2mm(+/-1)
704/P - Joint width 9mm overall width 9mm, height 70mm, movement 2mm(+/-1)
Visible width: 9mm
Colour: Grey or RAL colours
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 701/P / Movement Joint 702/P / Movement Joint 703/P / Movement Joint 704/P
Size:
Overall profile width: 9mm
Profile height: 25mm / 40mm / 55mm / 70mm
Colour: Grey / RAL Colour ……

Movement Joint 710 Field Limitation Joints
Aluminium, brass or stainless steel construction with a Nitriflex® rubber insert, designed for heavy-duty application with a high load capability and high abrasion resistance for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 10mm
Visible width: 9 and 14mm
Overall width: 14, 40 and 70mm
Profile height: 20, 25, 30, 40, 50 and 60mm
Colour: Black, grey and RAL colours
Total movement: 2mm(+/-1mm)
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference:
Movement Joint 710-AL Aluminium / Movement Joint 710-VA Stainless steel / Movement Joint 710-MS Brass
Movement Joint 710/E-AL Aluminium / Movement Joint 710/E-VA Stainless steel / Movement Joint 710/E-MS Brass
Movement Joint 710/B-AL Aluminium / Movement Joint 710/B-VA Stainless steel / Movement Joint 710/B-MS Brass
Size:
Visible width: 9mm / 14mm
Overall profile width: 14mm / 40mm / 70mm
Profile height: 20mm / 25mm / 30mm / 40mm / 50mm / 60mm
Colour: Black / Grey / RAL Colour ……