Click to enter Movement Joints (UK) web site

Click here to enter main site 
Movement Joints (UK) Limited

Tel: 01945 450015

To complete the clause, select the appropriate wording from below. Highlighted text can be ‘dragged and dropped’ to save typing.

M40 STONE/CONCRETE/QUARRY/CERAMIC TILING/MOSAIC

825 STRIP MOVEMENT JOINTS . . . . . .

Movement Joint (UK) Ltd manufacture a full range of movement joints suitable for use in screeds, natural stone, cast stone and a variety of other toppings. The range covers normal traffic, heavy traffic and low traffic areas, and options include ‘T’s,’X’s, upstands and curved sections.

See also clause M40/835 for metal section movement joints.

Click on the profile type below to jump to the product and specification details.
Surface and retro fix profiles
Field limitation joints

Surface and retro fix profiles
Click on the name below to jump to the product and specification details.
Movement Joint 426/NG Floor Series
A post/retro fix system manufactured with aluminium frame, Nitriflex® insert, (smooth surface) and designed for all finishes - screed, natural stone, cast stone etc. for normal traffic areas.
Movement Joint 446/N Floor Series
A retro fix system manufactured with aluminium frame and replaceable Nitriflex® insert, (a smooth surface option is also available), and designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Movement Joint 446/TNa Floor Series
A retro-fix system manufactured with aluminium frame and replaceable Nitriflex® insert. (a smooth surface option is also available), and designed for use with all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Movement Joint 446/TNb Floor Series
A retro-fix system manufactured with aluminium frame and a replaceable Nitriflex® insert, (a smooth surface option is also available), and designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.

Movement Joint 426/NG Floor Series
A post/retro installation system manufactured with aluminium frame, Nitriflex® insert, (smooth surface) and designed for all finishes - screed, natural stone, cast stone etc. for normal traffic areas.
Loadbearing capacity: 25kN fork-lift trucks for 80mm joints and slow moving cars only for 100mm joints
Joint Width: Up to 80 or 100mm
Over all profile width: 178 or 198mm
Profile Height: 43mm
Insert Colour: Black/Grey
Total Movement:
6mm(+/-3mm) for 426/NG-080
8mm(+/-4mm) for 426/NG-100
Floor to wall/corner profile available
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Co. PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 426/NG-080 / Movement Joint E 426/NG-080 (floor to wall)
Movement Joint 426/NG-100 / Movement Joint E 426/NG-100 (floor to wall)
Overall profile width:
178mm
– for 80mm joint width
198mm – for 100mm joint width
Profile height: 43mm
Insert colour: Black / Grey

Movement Joint 446/N Floor Series
A retro fix system manufactured with aluminium frame and replaceable Nitriflex® insert, (a smooth surface option is also available), and designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 70kN fork-lift trucks and 600kN slow moving trucks for 20 and 30mm joints, 70kN fork-lift trucks and 90kN slow moving vans for 50mm joints and 25kN fork-lift trucks for 65mm joints.
Joint width: Up to 20, 30, 50 and 65mm
Overall profile width: 120, 150, 175 and 185mm
Profile height: 17 and 26mm
Insert Colour: Black/Grey (other colours available)
Total Movement:
6mm(+/-3mm) for 20mm joint
10mm(+/-5mm) for 30mm joint
14mm(+/-7mm) for 50mm joint
20mm(+/-10mm) for 65mm joint
Floor to wall/corner profile available.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Co. PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 446/N-020 / Movement Joint E 446/N-020 (floor to wall)
Movement Joint 446/N-030 / Movement Joint E 446/N-030 (floor to wall)
Movement Joint 446/N-050 / Movement Joint E 446/N-050 (floor to wall)
Movement Joint 446/N-065 / Movement Joint E 446/N-065 (floor to wall)
Overall profile width:
120mm
– for 446/N-020
150mm – for 446/N-030
175mm – for 446/N-050
185mm – for 446/N-065
Profile height:
17mm
– for 446/N-020
26mm – for 446/N-030
26mm – for 446/N-050
26mm – for 446/N-065
Insert colour: Black / Grey

Movement Joint 446/TNa Floor Series
A retro-fix system manufactured with aluminium frame and replaceable Nitriflex® insert. (a smooth surface option is also available), and designed for use with all finishes - screed, natural stone, cast stone etc., for normal traffic areas. The Ta insert can be welded to vinyl floor covering.
Loadbearing capacity: 70kN fork-lift trucks and 600kN slow moving trucks for 20 and 30mm joints, 70kN fork-lift trucks and 90kN slow moving vans for 50mm joints.
Joint width: Up to 20, 30 and 50mm
Overall profile width: 120, 150 and 175mm
Profile Height: 20 and 29mm
Insert Colour: Black/Grey (other colours available)
Total Movement:
6mm(+/-3mm) for 446/TNa-020
10mm(+/-5mm) for 446/TNa-030
14mm(+/-7mm) for 446/TNa-050
Floor to wall/corner profile available
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Co. PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 446/TNa-020 / Movement Joint E 446/TNa-020 (floor to wall)
Movement Joint 446/TNa-030 / Movement Joint E 446/TNa-030 (floor to wall)
Movement Joint 446/TNa-050 / Movement Joint E 446/TNa-050 (floor to wall)
Overall profile width:
120mm
– for 446/TNa-020
150mm – for 446/TNa-030
175mm – for 446/TNa-050
Profile height:
20mm
– for 446/TNa-020
29mm – for 446/TNa-030
29mm – for 446/TNa-050
Insert colour: Black / Grey

Movement Joint 446/TNb Floor Series
A retro-fix system manufactured with aluminium frame and a replaceable Nitriflex® insert, (a smooth surface option is also available), and designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas. The raised insert allows for carpet fixing.
Loadbearing capacity: 70kN fork-lift trucks and 600kN slow moving trucks for 20 and 30mm joints, 70kN fork-lift trucks and 90kN slow moving vans for 50mm joints.
Joint width: Up to 20, 30 and 50mm
Overall profile width: 120, 150 and 175mm
Profile Height: 22 and 31mm
Insert Colour: Black/Grey (other colours available)
Total Movement:
6mm(+/-3mm) for 446/TNb-020
10mm(+/-5mm) for 446/TNb-030
14mm(+/-7mm) for 446/TNb-050
Floor to wall/corner profile available
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Co. PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 446/TNb-020 / Movement Joint E 446/TNb-020 (floor to wall)
Movement Joint 446/TNb-030 / Movement Joint E 446/TNb-030 (floor to wall)
Movement Joint 446/TNb-050 / Movement Joint E 446/TNb-050 (floor to wall)
Overall profile width:
120mm
– for 446/TNb-020
150mm – for 446/TNb-030
175mm – for 446/TNb-050
Profile height:
22mm
– for 446/TNb-020
31mm – for 446/TNb-030
31mm – for 446/TNb-050
Insert colour: Black / Grey

Field limitation joints

Click on the name below to jump to the product and specification details.
Movement Joint 490/AL Field Limitation Joints
All metal construction comprising an aluminium frame with high edge protection, a smooth surface, high load bearing and a good key to mortar through graded aluminium side bars. Designed for heavy-duty application for all finishes.
Movement Joint 494/MS Field Limitation Joints
A combination frame consisting of brass with foam filler with a smooth surface and providing a good key to mortar and designed for all finishes.
Movement Joint 495/P Field Limitation Joint
Aluminium, Brass or Stainless steel construction with a combination of hard and soft PVC insert with metal caps. Designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 496 Field Limitation Joints
Aluminium, Brass or Stainless steel construction with a cellular rubber insert giving high edge protection. Designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 497/AL + ALE Field Limitation Joints
Aluminium or Stainless steel construction with a Nitriflex or PVC insert, separation of mortar beds is achieved by means of an adjustable centre section. Designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 498/AL Field Limitation Joints
Aluminium construction with a cellular rubber insert, designed for heavy-duty application with a high load capability for all finishes.
Movement Joint 630/P & 640/P Field Limitation Joints
Combination co-extruded PVC’s construction for all finishes - screed, natural stone, cast stone etc., for light traffic areas.
Movement Joint 690/P Field Limitation Joints
A PVC construction, designed for heavy-duty application with a high load capability for concrete floors and screed work in heavy traffic areas.
Movement Joint 700/P Field Limitation Joints
Constructed from combination co-extrusion of soft and hard PVC, designed for all finishes and light traffic areas.
Movement Joint 710 Field Limitation Joints
Aluminium, brass or stainless steel construction with a Nitriflex® rubber insert, designed for heavy-duty application with a high load capability and high abrasion resistance for all finishes.

Movement Joint 490/AL Field Limitation Joints
All metal construction comprising an aluminium frame with high edge protection, a smooth surface, high load bearing and a good key to mortar through graded aluminium side bars. Designed for heavy-duty application for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving trucks.
Joint width: 10mm
Visible width: 10mm
Overall profile width: 67mm
Profile height: 35 or 50mm
Colour: Natural
Total Movement: 4mm(+/-2mm)
Also available as floor to wall/corner profile
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference: Movement Joint 490/AL / Movement Joint E 490/AL (floor to wall)
Colour: Natural

Joint width: 10 mm

Movement Joint 494/MS Field Limitation Joints
A combination frame consisting of brass with foam filler with a smooth surface and providing a good key to mortar and designed for all finishes - screed, natural stone, cast stone etc., for normal traffic areas.
Loadbearing capacity: 25kN fork-lift truck
Joint width: 8mm
Visible width: 10mm
Overall profile width: 25mm
Profile height: 55mm
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference: Movement Joint 494/MS
Colour: Brass

Joint width: 8 mm

Movement Joint 495/P Field Limitation Joint
Aluminium, Brass or Stainless steel construction with a combination of hard and soft PVC insert with metal caps. Designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 5mm
Visible width: 10mm
Overall profile width: 65mm
Profile height: 40 or 50mm
Colour: Black/Grey/RAL colours.
Total Movement: 2mm(+/-1mm)
Available as floor to floor or, floor to wall profiles.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 495/P-AL - Aluminium
Movement Joint 495/P-VA - Stainless steel
Movement Joint 495/P-MS - Brass
Colour: Black / Grey / RAL colour: .......

Joint width: 5 mm

Movement Joint 496 Field Limitation Joints
Aluminium, Brass or Stainless steel construction with a cellular rubber insert giving high edge protection. Designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 5mm
Visible width: 8 and 9mm
Overall profile width: 65 and 85mm
Profile height: 20, 25, 30, 40, 50 and 60mm (Brass not available in 25mm height)
Colour: Black, grey and stone
Total Movement: 4mm(+/-2mm)
Available as floor to floor or, floor to wall profiles.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 496/AL - Aluminium
Movement Joint 496/E - Stainless steel
Movement Joint 496/MS - Brass
Colour: Black / Grey / Stone

Joint width: 8 / 9 mm

Movement Joint 497/AL + ALE Field Limitation Joints
Aluminium or Stainless steel construction with a Nitriflex or PVC insert, separation of mortar beds is achieved by means of an adjustable centre section. Designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 12mm
Visible width: 15 and 17mm
Overall profile width: 212mm
Profile height: 50 or 60mm
Colour: Black and grey
Total Movement: 5mm(+/-2.5mm)
Available as floor to floor or, floor to wall profiles.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 497/AL - Aluminium
Movement Joint 497/ALE - Stainless steel
Colour: Black / Grey

Joint width: 12 mm

Movement Joint 498/AL Field Limitation Joints
Aluminium construction with a cellular rubber insert, designed for heavy-duty application with a high load capability for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 10kN fork-lift trolley, 130kN fork-lift truck and 600kN slow moving truck for 9mm joint and 35kN fork-lift truck and 120kN slow moving small vans for 15mm joint.
Joint width: 9 or 12mm
Visible width: 16 and 24mm
Overall profile width: 150 and 158mm
Profile height: 60mm
Stainless steel finish
Also available as rim profile for floor to wall fixing.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference: Movement Joint 498/AL-009 / Movement Joint 498/AL-015
Colour: Stainless Steel

Joint width: 9 / 12 mm

Movement Joint 630/P & 640/P Field Limitation Joints
Combination co-extruded PVC’s construction for all finishes - screed, natural stone, cast stone etc., for light traffic areas.
Loadbearing capacity: Pedestrian traffic only
Joint width: 8 or 10mm
Visible width: 8 and 10mm
Profile height: 25, 30, 35, 40, 50 or 60mm
Colour: Grey or RAL colours
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference: Movement Joint 630/P / Movement Joint 640/P
Colour: Grey / RAL colour: ........

Joint width: 10 mm

Movement Joint 690/P Field Limitation Joints
A PVC construction, designed for heavy-duty application with a high load capability for concrete floors and screed work in heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving trucks
Joint width: 1.5mm
Visible width: 1.5mm
Size:
691/P - overall width 30mm, height 40mm
692/P - overall width 35mm, height 50mm
693/P - overall width 60mm, height 80mm
694/P - overall width 70mm, height 125mm
Colour: Grey or beige
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 691/P / Movement Joint 692/P / Movement Joint 693/P / Movement Joint 694/P
Colour: Grey / Beige

Joint width: 1.5 mm

Movement Joint 700/P Field Limitation Joints
Constructed from combination co-extrusion of soft and hard PVC, designed for all finishes and light traffic areas.
Loadbearing capacity: Pedestrian only
Size:
701/P - Joint width 9mm overall width 9mm, height 25mm, movement 2mm(+/-1)
702/P - Joint width 9mm overall width 9mm, height 40mm, movement 2mm(+/-1)
703/P - Joint width 9mm overall width 9mm, height 55mm, movement 2mm(+/-1)
704/P - Joint width 9mm overall width 9mm, height 70mm, movement 2mm(+/-1)
Visible width: 9mm
Colour: Grey or RAL colours
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 701/P / Movement Joint 702/P / Movement Joint 703/P / Movement Joint 704/P
Colour: Grey / RAL colour: .......

Joint width: 9 mm

Movement Joint 710 Field Limitation Joints
Aluminium, brass or stainless steel construction with a Nitriflex® rubber insert, designed for heavy-duty application with a high load capability and high abrasion resistance for all finishes - screed, natural stone, cast stone etc., for heavy traffic areas.
Loadbearing capacity: 130kN fork-lift truck and 600kN slow moving truck
Joint width: 10mm
Visible width: 9 and 14mm
Overall width: 14, 40 and 70mm
Profile height: 20, 25, 30, 40, 50 and 60mm
Colour: Black, grey and RAL colours
Total movement: 2mm(+/-1mm)
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer and reference: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Reference:
Movement Joint 710-AL Aluminium / Movement Joint 710-VA Stainless steel / Movement Joint 710-MS Brass
Movement Joint 710/E-AL Aluminium / Movement Joint 710/E-VA Stainless steel / Movement Joint 710/E-MS Brass
Movement Joint 710/B-AL Aluminium / Movement Joint 710/B-VA Stainless steel / Movement Joint 710/B-MS Brass
Colour: Black / Grey / RAL colour: .......

Joint width: 10 mm