Deflex All Metal Intermediate / Field Limitation Joints


Designed to absorb localised movement in hard flooring finishes and comply with the recommendations of BS5385 Part 3 and BS5385 part 5, DIN 18 333 and DIN 18 157.

Please contact us for details of other profiles in this category

Profile Reference 660/AL-01   660/AL-04
To Joint width (mm) 7   7
Heights (mm)* 7   13.6
Visible width (mm) 9.5   9.5
Movement (mm) +/- 2mm
Colours Natural
Typical Wheel-Load / Load Bearing:
Typical uses  factories, offices, airports, passenger terminals, shops
Options





Aluminum movement joint for joint widths up to 10mm - 490/AL Series Profile Reference 490/AL
To Joint width (mm) 10
Heights (mm)* 35 or 50
Visible width (mm) 10
Movement (mm) +/-2
Colours Natural
Typical Wheel-Load / Load Bearing:        
Typical uses Shopping Centres, Supermarkets, factories, offices, airports, passenger terminals
Options Floor to wall/corner versions.  
 





Profile Reference 494/MS
To Joint width (mm) 8
Heights (mm)* 55
Visible width (mm) 10
Colours Brass
Typical Wheel-Load / Load Bearing:      
Typical uses Shopping Centres, Supermarkets, offices, airports, passenger terminals
 





All metal movement joint for joint widths up to 15mm - 498/AL Series Profile Reference 498/AL-009 498/AL-015
To Joint width (mm) 9 15
Heights (mm)* 60 60
Visible width (mm) 16 24
Movement (mm) +/-2.5 +/- 4
Colours Natural
Typical Wheel-Load / Load Bearing:        
Typical uses Shopping Centres, supermarkets, factories, offices, airports, passenger terminals, industrial premises, warehouses
Options Floor to wall/corner versions.  
 
Copyright © 1999-2007 by Movement Joints (UK) Ltd. All rights reserved.
This document may not be reproduced in whole or in part without permission.