Movement Joints (UK)
Unit 3, 57 Thorby Avenue, March, Cambridgeshire PE15 0AZ
Tel: 01354 607960 Fax: 01354 607833

Home Page

Product Information Request

Movement Joints (UK) have a reputation for technical expertise, quality products and the ability to supply both specifiers and contractors with the necessary drawings and method statements on an individual project basis.

These services are provided free of charge and for projects based within the United Kingdom, we provide a free on-site survey.

 

The following should be used when making detailed requests concerning our range of  movement joints and joint sealants.

 

The form is divided into 3 sections:

 

Section 1:    Floor Movement Joints

Section 2:    Wall Movement Joints

Section 3:    Joint sealants  e.g. brick work, concrete panels, non load bearing surfaces


Home Page


Section 1:                                                            Floor Movement  joints

When e-mailing an enquiry for movement joints, please complete as many of the following questions as is possible:

 

Preferred Style:

With insert Surface fix All metal  All metal surface fix
Alternative finish:      
Brass
     
Stainless Steel
     

Diag. A

1. What is the joint width (Fb)? +/-  mm
2. What is the expected horizontal movement (+/- W)? +/-  mm
3. What is the expected vertical movement? +/-  mm
4. What is the depth to finished floor level (H)? +/-  mm
5. What is the expected traffic?   Pedestrian
Car
Small Lorries
Large Lorries
Pallet trucks
Forklift
Other
6. Does the joint need to be watertight?  Yes No
7. Will the profile be exposed to any chemicals?  Yes No
8. Any special requirements?
9. Are pre-fabricated 'T' 'Y' or 'X' intersections required?
10. What quantity is required in linear metres?  l/m's
11. Are there any drawings available?   Yes No

DO NOT FORGET TO COMPLETE THE CONTACT DETAILS AT THE BOTTOM OF THIS FORM

 

 

 

Section 2:                                                                 Wall Movement joints

When e-mailing an enquiry for movement joints, please complete as many of the following questions as is possible:

1. What is the joint width (Fb)? +/-  mm
2. What is the expected horizontal movement (+/- W)? +/-  mm
3. What is the expected vertical movement? +/-  mm
4. If plaster or render finish, what is the depth (H)? +/-  mm
6. Does the joint need to be weatherproof?  Yes No
7. Will the profile be exposed to any chemicals?  Yes No
8. Any special requirements?
9. Are pre-fabricated intersections required?
10. What quantity is required in linear metres?  l/m's
11. Are there any drawings available?   Yes No

DO NOT FORGET TO COMPLETE THE CONTACT DETAILS AT THE BOTTOM OF THIS FORM

 

Section 3:    Joint seals      e.g.  horizontal or vertical seals in brick work, concrete

1. What is the joint size (Fb)? +/-  mm
2. What is the joint depth? +/-  mm
3. What is the expected movement? +/-  mm
4. What is the joint construction?

5. Is the joint internal or external? Internal
External
6. What type of seal is required?
7. What quantity is required? (in linear metres)  l/m's
8. Is it a horizontal or vertical joint? horizontal
vertical
9. Are there any drawings available?   Yes No

DO NOT FORGET TO COMPLETE THE CONTACT DETAILS AT THE BOTTOM OF THIS FORM

Contact Details

Name
Company
Address
Telephone
Fax:
Email

HOME PAGE

 


Copyright © 1999-2005 by Movement Joints (UK) Ltd. All rights reserved.
This document may not be reproduced in whole or in part without permission.