Click to enter Movement Joints (UK) web site
Click here to enter main site 
Movement Joints (UK) Limited

Tel: 01945 450015

To complete the clause, select the appropriate wording from below. Highlighted text can be ‘dragged and dropped’ to save typing.

E40 DESIGNED JOINTS IN IN-SITU CONCRETE

550 COMPRESSIBLE SEALING STRIPS AND CAPPING FOR . . . . . . . . .

Colourseal S
Suitable for joints in concrete, brick and blockwork, curtain wall and cladding systems, horizontal and vertical joints, ideal for new build and refurbishment work the sealer is weathertight and provides thermal and acoustic seals. Colourseal combines a factory applied low-modulus silicone, acrylic impregnated expanding foam sealant and closed cell (EVA) foam into a unified binary system.
The silicone external colour weather facing is factory applied to the foam, while partially pre-compressed, which forms a bellows virtually eliminating tensile stresses at the silicone/substrate interface.
Colourseal is suitable for joint widths from 9mm to 200mm.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference: Colourseal S
Capping colour: Black / White / Brick / Grey
A further 7 colours are available – consult with Movement Joints (UK) Ltd for details

Colourseal ‘H’
Designed to be used for horizontal, in floor applications that are protected from direct contact with traffic – e.g. recessed slightly below concrete surface and covered with a metal plate or located next to a wall.
Colourseal ‘H’ is installed with factory applied butyl strip or field applied epoxy side adhesive and corner beads and combines a factory applied low-modulus silicone, acrylic impregnated expanding foam sealant and a closed cell (EVA) foam into a unified binary system. The silicone external colour weather facing is factory applied to the foam, while partially pre-compressed, which forms a bellows virtually eliminating tensile stresses at the silicone/substrate interface.
Joint widths from 20 to 150mm.
Consult Movement Joints (UK) Ltd technical literature for details. Movement Joints (UK) Ltd can also provide a design and specification service and it is recommended that they are consulted early in the design process.

Manufacturer: Movement Joints (UK) Ltd PO Box 10, Wisbech, Cambridgeshire. PE13 4AN. Tel: 01945 450015. Fax 01945 450819. Web: www.mjuk.co.uk Email: info@mjuk.co.uk
Product reference: Colourseal H
Capping colour: Black / White / Brick / Grey
A further 7 colours are available – consult with Movement Joints (UK) Ltd for details