Deflex® intermediate / field limitation movement joints
Intermediate / field limitation movement joints are designed to absorb localised movement in hard flooring finishes and comply with the recommendations of BS5385 Part 3 and BS5385 part 5, DIN 18 333 and DIN 18 157.
![]() |
Profile Reference |
MJ1 Series ![]() MJ1-AL = aluminum MJ1-BR = brass MJ1-SS = stainless steel |
MJ2 Series ![]() MJ2-AL = aluminum MJ2-BR = brass MJ2-SS = stainless steel |
MJ3 Series ![]() MJ3-AL = aluminum MJ3-BR = brass MJ3-SS = stainless steel |
Up to Joint width (mm) |
5 |
5 |
5 |
|
Heights (mm)* |
10 / 13 / 15 / 20 / 25 / 30/ 40 / 50 /
60 / 70 / 80mm Other heights available upon request |
|||
Visible width (mm) |
10.5 |
10.5 |
10.5 |
|
Movement (mm) |
2 (+/-1) |
|||
Insert colours |
Black, grey, stone |
|||
Suffix / Material reference |
AL = aluminium, SS=
stainless steel, BR = brass, Neoprene |
|||
Typical Wheel-Load / Load Bearing: |
![]() ![]() ![]() ![]() ![]() |
|||
Typical uses |
Shopping centres, supermarkets, underground
railaways, offices, airports, passenger terminals |
|||
Options |
VAMAC inserts |
|||
![]() |
Profile Reference |
495/P |
495/P-VA |
Up to Joint width (mm) |
5 |
5 |
|
Heights (mm)* |
30 or 45 |
40 or 50 |
|
Visible width (mm) |
9 |
10 |
|
Movement (mm) |
2 (+/-1) |
||
Insert colours |
Black, grey (and RAL colours) |
||
Material |
PVC |
PVC, stainless steel capping |
|
Typical Wheel-Load / Load Bearing: |
![]() ![]() ![]() |
||
Typical uses |
Shopping Centres, Supermarkets, factories,
offices, airports, passenger terminals |
||
Options |
Floor to wall/corner versions.
|
||
Copyright © 1999-2006 by Movement Joints (UK) Ltd.
All rights reserved.
This document may not be reproduced in whole or in part without permission.